Ultimate Jets
- Phoenix Mk2 assembly manual - Revision 2 - 08/11/2013
Stabilizer servo :
Fasten the servo in the servo cover (you can also glue it with silicon glue for increased safety)
Place the servo cover on the stab in its pocket.
Drill four 1 mm holes in the stab at the screws
location.
Make a 10 mm hole in on side of the stab for the
servo plug.
Cut a slot in the control surface for the fiber control
horn.
Glue the control horn with Hysol E20HP .
Connect two 3 mm link with the provided M3
threaded rod.
Fasten the servo cover in position with 4 countersink
sheet metal screws provided.
Connect the servo to the control horn.
Apply thread lock.
