Ultimate Jets
- Diamond assembly manual - Revision 4 - 01/01/2015
34
Nose cone:
The nose cone is very long and can be fastened using two ways.
Either 4 countersink sheet metal screws going through the side of the fuselage lip or the UJ smart fastening
system.
Sheet metal screw:
Place the nose cone on the fuselage and secure firmly with tape. Make sure the nose is straight.
Drill 4 holes at 22 mm in front of of the cone junction. Use a 1.5 mm jobber.
Insert the supplied 2 mm sheet metal screws.