Ultimate Jets
- Diamond assembly manual - Revision 4 - 01/01/2015
15
Maximum speed for landing flaps is 80 mph:
Fit a high quality aluminium arm on the servo spline. Install the supplied 4-40 HD ball link on the arm
with a countersink screw and thin nut. Trim any screw thread excess to make the arm/ ball/ screw head
assembly as thin as possible.
Install the servos in the carbon fiber Ultimate Servo Covers with the provided #6 sheet metal screws. A
spacer might be required to place the servo arm/ ball link/ screw assembly exactly centered in the carbon
fiber funnel. the clearance should be 0.5 mm , evenly split both sides. Apply thread lock fluid.
