Ultimaker S5 Material Station, Инструкция по установке и эксплуатации

Страница: 44 / 68

44
Clean the glass components
All glass components of the printer (the glass doors and touchscreen) should be cleaned regularly to remove dust or
fingerprints. They can be cleaned by using a dry, or if necessary, a somewhat moist microfiber cloth.
Clean the nozzles
While using the Ultimaker S5, material can get stuck to the outside of the nozzles and degrade. Although this will not
damage your printer, it is recommended keep the nozzles clean in order to achieve the best print results.
Before starting a new print, always check the nozzles. At least once a month, remove the plastic from the outside of the
nozzles by taking the following steps:
During this procedure do not touch the nozzles and be careful while cleaning them as they will become hot.
1. On the Ultimaker S5, navigate to the configuration menu, select print core 1, then click on the icon in the top-right
corner and select Set temperature.
2. Use the controls to set the target temperature to 150 °C. Repeat this for print core 2 and make sure this print core is
lowered.
3. Wait for the material on the outside to get soft. When the nozzles are hot, carefully remove the material with
tweezers.
The nozzle cover is fragile and has a sealing function. Be careful not to damage the nozzle cover when using
tweezers.
Material may have accumulated higher up on the outside of the nozzle, above the nozzle cover. Check if this
is the case by opening the print head fan bracket. To ensure the print head can close smoothly, this material
should be removed using tweezers, as described above.