Ultimaker S5 Material Station, Инструкция по установке и эксплуатации

Страница: 2 / 68

2
Disclaimer
Please read and understand the contents of this installation and user manual carefully. Failure to read
the manual may lead to personal injury, inferior results or damage to the Ultimaker S5. Always make
sure that anyone who uses this 3D printer knows and understands the contents of the manual to make
the most out of the Ultimaker S5.
The conditions or methods used for assembling, handling, storage, use or disposal* of the device are beyond our
control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly
disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly,
handling, storage, use or disposal of the product.*
The information in this document was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness.
Intended use Ultimaker S5
Ultimaker 3D printers are designed and built for fused filament fabrication with Ultimaker materials within a
commercial/business environment. The mixture of precision and speed makes Ultimaker 3D printers a perfect machine
for concept models, functional prototypes and small series production. Although we achieved a very high standard in
the reproduction of 3D models with the usage of Ultimaker Cura, the user remains responsible to qualify and validate
the application of the printed object for its intended use, especially critical for applications in strictly regulated areas
like medical devices and aeronautics. While being an open material platform, the best results will be achieved with
Ultimaker materials, while effort has been made to match material properties with machine settings.
* We comply to the WEEE-directive.
Copyright © 2018 Ultimaker. All rights reserved worldwide.
This language version of the manual is verified by the manufacturer (Original manual).
No part of this publication, including pictures may be reproduced and/or made public,
whether by printing, photocopying, microfilm or by any other means whatsoever,
without the prior written permission of Ultimaker.