ulsonix TOPCLEAN VER, Руководство пользователя

Страница: 20 / 218

EN
2. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire, and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions
refers to:
Floor polishing machine
2.1. Electrical safety
a) The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b) Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock. When operating the product outdoors, use an extension cord
designed for outdoor use. Using an extension cord designed for outdoor use
reduces the risk of electric shock.
e) If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
f) Do not use the appliance if the power cord is damaged or shows signs of wear.
A damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g) Take special care that the power cords are not caught by the rotating
components of the device.
h) The maximum total length of the device's power cord (from the current outlet
to the device itself) should not exceed 30 m due to voltage losses and the
associated risk of engine damage.
2.2. Safety in the workplace