13
3.Maintenance and Repair
Maintenance must be performed by authorized integrators or UFACTORY (Shenzhen) Tech-
nology Co., Ltd. All parts returned to UFACTORY (Shenzhen) Technology Co., Ltd. shall be
returned according to the service manual.
Make sure to reach the safety requirements of maintenance and repair, follow all regional
and national guidelines and test whether all safety functions work normally.
The purpose of maintenance and repair is to make sure that system runs normally or help it
return to normal condition when a system error occurs, including faults diagnosis and
actual maintenance.
Operators must follow the safety procedures and warnings as below:
1.Do not change any of the information in the software security configuration. If the safety
parameters have been changed, the entire robotic arm system should be considered as a
new system, and all the safety audit process (e.g., risk assessment) must be updated.
2.Replace the defective components by new components with the same article number or
equivalent components approved by UFACTORY (Shenzhen) Technology Co., Ltd.
3.Record all maintenance operations and save in technical documentation. The system
should be considered as a new system, and all the safety audit process (e.g., risk assess-
ment) must be updated.
WARNING