UE Field Safety System One Series, Инструкция по установке и обслуживанию

Страница: 18 / 24

IM_ONE_Safety-07
www.ueonline.com
18
LOST PASSWORDS
Contact UE Inside Sales at +1-617-923-6977 or go online at www.UEonline.com/UUC to obtain a unique unlock code. The Kanban number from
the product nameplate is required (see Figure 19).
Table 6
THIS DOCUMENT IS PROPRIETARY
PROPERTY OF UNITED ELECTRIC CONTROLS.
UNAUTHORIZED USE IS STRICTLY PROHIBITED.
TOLERANCES ON FRACTIONS ±1/64
±1/2° ±0.010 ±0.005
2 PLACE DEC 3 PLACE DEC ANGLES
Page 1 of 1
WARNING: AGENCY CRITICAL DOCUMENT.
NO REVISIONS WITHOUT CERTIFICATION
ENGINEER APPROVAL
NOTES:
LASER MARKED ON BLANK NAMEPLATE P/N 6211-751. 1.
NAMEPLATE DIMENSIONS ARE 3.943" REF X 1.35" REF
FORMAT SHOWS FIXED TEXT AND GRAPHICS ONLY. 2.
ANY VARIABLE TEXT SHOWN IS BETWEEN * MARKS.
C E5537 ADDED PROTECTION METHOD CHECK BOXES. 6-12-15 SR EM
B E5530 UPDATED PER AGENCY REQUIREMENTS 6/9/15 SR EM
A E5453 FIRST ISSUE 5/14/15 SR EM
EM
2.25:1
DWG NO
UNITED ELECTRIC
CONTROLS COMPANY
WATERTOWN * MASSACHUSETTS
SCALE
TITLE
ORIGINAL DATE
DRWN
CHKD
APPD
DO NOT SCALE THIS DRAWING
DOC #: DE733010102 Rev B
EM
ONE SERIES
1X
NAMEPLATE
A-6211-847
SR
5/14/15
6211-847
DESCRIPTION DATE DRWN APPD
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
REV. ECN#
Figure 19
Kanban number and Date Code
Set Point Reached IAW Fault SRO Status IAW Output Safety Relay Output
No No Closed Closed Closed
No Yes Open Open Open
Yes No Open Closed Open
Yes Yes Open Open Open
DISCRETE OUTPUTS TRUTH TABLE
TROUBLESHOOTING
The Safety Relay Output contained in the One Series
Field Safety System™
is electronic, and the signal is produced by a transistor or a
solid-state relay. The Safety Relay Output cannot be properly tested with an ohmmeter. Instead, measure the voltage drop across the SRO
connected to the intended load to determine if it is open or closed. A properly functioning One Series
Field Safety System™
will exhibit the
following voltage levels:
Troubleshooting Voltage Levels
Output Location Voltage Open Voltage Closed
IAW OUTPUT TB4 pins 1,2 24 VDC (Loop Voltage) 0 VDC
SRO STATUS TB3 pins 1,2 24 VDC (Loop Voltage) 0 VDC
SRO TB2 pins C,D Load Power Supply Voltage 0 VAC
Table 7