Mr Bot 280
27
Successful first layer
Nozzle too close
Nozzle too far
By increasing the number, we reduce the distance. We use it when we have a
sparse first layer. While reducing the number, we increase the distance. We use
it when we have a compressed first layer.
Important!
This setting cannot be
performed during printing.
The "
Tape selection
" option allows you to choose between "
Glass
", "
Kapton
tape
" and "
Blue painters tape
". Here you can choose the type of tape you have
on the print surface and automatically change the nozzle distance from the print
surface without affecting the saved distance. With the option “Glass”, you adjust
the nozzle distance exactly as it was before the use of a tape.
In
"Position"
we can move all axes and the extruder manually as well as homing
them.
In "
Extruder
" you are able to preheat the nozzle and/or the print surface at the
temperature of your choice.
In "
Advanced settings
" you have to do with changes in speed, acceleration, etc.
It is not recommended to change these settings by inexperienced users.
