Mr Bot 280
22
Material selection
Profile selection
Infill density
Support material
Bed adhesion
The infill depending on the quality you select will change according to the
suggested settings. We use it to have a durable model, but also to make
some filament saving.
Support is selected in cases where we have overhanging parts of the
model. It will prevent the model from sagging or printing mid-air. It will
create support where needed.
Build plate adhesion will create an additional layer of material that will
provide more hold on the print surface. We use it on models with a small
base or models where the base is narrower than the rest of the model,
such as Vases, so that they do not detach when printing.
Let Cura to complete the slicing procedure. In the bottom right side you will find
information about the printed file, such as print time and quantity of filament
used. Next you can save the file. Note: the print time may be different from the
one shown.
