Mr Bot 280
23
Save the file
After Cura has sliced the model, you can save it on the SD card. Otherwise, you
can keep the file on your computer.
1.
Connect the SD card to your computer. If the memory card has not been
used before by the computer, an installation may take place. Wait until this
process is complete.
2.
Press the arrow on Save to Removable Drive at the bottom right. There you
have an option to save the file to your computer or save it directly to the
SD card. We recommend that you work with the SD card.
3.
Securely remove the SD card from your computer, place it in your printer,
and you are ready to print.
Preparing the model
Cura has all the tools you need to prepare your model before printing. The tools
are listed to the left side of the screen.
Move tool
By selecting the model automatically
opens the tool.
You can move it either by click and
drag, or by moving the X, Y, and Z
axes.
Attention!
If you set a negative value
on the Z axis, remove part of the
model base.
Scale tool
You can modify the size of the model
either numerically or scale percentage,
or simply pull the "handles" on the three
axes.
You can make Uniform Scaling or Snap
Scaling.
