Mr Bot 280
20
Step 2
Then put the spool in place and pass
the filament from the teflon tube until it
finds a strong resistance.
Press the button to go to the main menu, select "Print" or "Quick settings", then
"Change filament", "Load" and wait for the temperature to reach the desired
level. With the continuous sound, after the temperature reached the desired
level, push the material toward the teflon tube so that the motor can snap it
more easily, and at the same time press the LCD’s knob. Wait a few seconds
until you see some of the material coming out of the nozzle. Press the knob once
more to stop the material from coming out.
Before you start printing, preheat the print surface for three to four minutes. In
the main menu, select "Preheat", then "Preheat PLA / PHA" and "Preheat bed".
Now you are ready for your first print. In the main menu, select "Print" and then
"Print from SD". Choose a ready-to-print file, and start.
Have a nice print !!!