background image

Mr Bot 280 

 

Warranty 

 

The products sold by this e-shop come with a two-year warranty. The warranty 

period  starts  from  the  delivery  of  the  products  to  the  consumer.  This  e-shop 

or/and  duly  authorized  persons  will  correct  and/or  repair  any  failure  or 

malfunction of the sold products or their parts, within a reasonable time period 
and in accordance with the following terms and conditions.    

 

 Terms and Conditions of Warranty Validity  

 

A. 

In  case  a  product  exhibits  signs  of  defect,  failure  or  malfunction  the 

consumer is advised: 

1) 

To  notify  this  e-shop  promptly  and  in  any  case  before  the  end  of  the 

aforementioned warranty period. 

2) 

To supply the proof of purchase. 

3) 

To supply all the relevant information concerning the nature of the defect, 

failure or malfunction to this e-shop (or/and to any duly authorized persons who 

will correct and/or repair any failure or malfunction of the sold products or their 

parts), promptly and in any case before the end of the aforementioned warranty 
period. 

 

B. 

The consumer is kindly informed that:  

1) 

The  consumer  takes  full  responsibility  for  the  transport  of  the  product  to 

and  from  the  facility  in  which  the  technical  evaluation/check,  service  and/or 

repair  of  the  product  will  be  conducted.  The  aforementioned  facility  will  be 

indicated  to  the  consumer  by  this  e-shop  (or/and  by  any  duly  authorized 

persons  who  will  correct  and/or  repair  any  failure  or  malfunction  of  the  sold 
products or their parts). 

2) 

This e-shop (or/and the duly authorized persons who will correct and/or 

repair  any  failure  or  malfunction  of  the  sold  products  or  their  parts)  will 

determine, within a reasonable time period, the suitable remedy for the failure or 
malfunction of the sold products or their parts.  

 

 

Содержание MR BOT 280









































Отзывы: