uBuild-3D MR BOT 280, Руководство пользователя

Страница: 30 / 40

Mr Bot 280
26
LCD menus and various operations
In the main menu you will find the following options:

Preheat

Print

Quick settings

Position

Extruder

Calibration

Advanced settings
In " Preheat " you can choose the material you are interested in and preheat either
the nozzle or the print surface with the pre-loaded temperatures.
The PLA/PHA pre-heat setting for the nozzle, can also be used for PETG, XT and
some FLEX materials.
The HT/ABS pre-heat setting for the nozzle, can also be used for NGEN and
NYLON materials.
In "Print" you can pause printing "Pause print" , eg to insert a nut. You can stop
printing "Stop print" . And you can set the fan speed "Fan speed%" .
In " Quick settings " you can increase or decrease the speed of the print with
" Speed multiplier ".
With " Babystepping " you can change the nozzle's distance from the print
surface with minor movements. Turn counterclockwise to lower the nozzle down
and clockwise to climb upwards. The babystepping correction is not saved after
the end of the print.
If you have done the initial calibration but you are not completely satisfied with
the result of the first layer, for example, the lines are too tight or sparse from
each other, you can manually change the distance between the nozzle and the
heated bed with the "
Z offset ".