Ublox MAX-M10S Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 89

background image

MAX-M10S - Integration manual

calculate the receiver position. This data is then provided to the customer enterprise cloud for
further use.

The receiver starts to collect measurements as soon as it ﬁnds any satellite signals. It does not
need to wait for a position ﬁx for this. Collecting the measurements takes only a short time, so the
application can quickly turn oﬀ the receiver or put it into a backup state.

2.15.1 CloudLocate measurements

The satellite signal measurements can be requested from the receiver either as a complete or
compact raw measurement message.

The complete raw measurement message (UBX-RXM-MEASX) provides measurements for all visible
satellites. The customer application can wait until the number of satellites in the message is
suﬃcient and then send the message to the CloudLocate service. The amount of data in a MEASX
message for ﬁve satellites is about 170 bytes. This increases by 24 bytes for each additional
satellite.

Compact raw messages (UBX-RXM-MEAS50, UBX-RXM-MEAS20, UBX-RXM-MEAS12C, and UBX-
RXM-MEAS12D) can be used when the amount of data to be sent to the cloud needs to be
minimized. The data can be reduced to 50, 20, or even 12 Bytes, and the time for the receiver to
stay on shall be limited to the minimum as well. These messages contain the measurement data
in compressed format and use satellites only from a limited set of GNSS constellations. With the
default settings, these messages contain measurement data only for a small number of satellites.

The raw measurement messages are enabled with the conﬁguration keys in the CFG-
MSGOUT conﬁguration group. For example, setting the conﬁguration key CFG-MSGOUT-
UBX_RXM_MEAS50_UART1 to value 1 with UBX-CFG-VALSET message enables output of the UBX-
RXM-MEAS50 message in the UART1 port for each navigation epoch.

The UBX-RXM-MEASX message can be sent with UBX header and checksum, and the message
can be either in binary format or as encoded text. With the compact raw measurement messages,
only the payload portion of the message is sent. Encoding the data would increase the size, so the
compact messages should be sent in binary format.

For more information on the raw measurement messages and on using the CloudLocate setup, see
the interface description [

] and the

u-blox website CloudLocate documentation

.

UBX-20053088 - R03

2 Receiver functionality

Page 61 of 89

C1-Public

«
...
59
60
61
62
63
...
»

Содержание MAX-M10S


























































































Отзывы:

Нет отзывов

Похожие инструкции для MAX-M10S

Бренд: Magnat Audio Страницы: 64

Stratophonic SR300B

Бренд: Harman Kardon Страницы: 10

BRUKSANVISNING AVR 255

Бренд: Harman Kardon Страницы: 58

Бренд: Harman Kardon Страницы: 60

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 7

Бренд: Harman Kardon Страницы: 34

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 4

Бренд: Harman Kardon Страницы: 120

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 52

Бренд: Harman Kardon Страницы: 28

Бренд: Harman Kardon Страницы: 4

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 10

Бренд: Harman Kardon Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды