Ubiquiti airFiber AF-11FX, Руководство пользователя

Страница: 17 / 56

11
Chapter 2: Installation airFiber AF-11FX User Guide
Ubiquiti Networks, Inc.
Connecting Power
Follow the instructions for the source of power that you
are using: Power over Ethernet
or DC Power.
Power Over Ethernet
1. Connect the Ethernet cable from the DATA port of the
AF‑11FX to the POE of the adapter.
WARNING: Use only the included adapter, model
GP-C500-120G. Failure to do so can damage
the unit and void the product warranty.
2. Connect an Ethernet cable from your LAN to the
adapter’s LAN port.
3. Connect the Power Cord to the adapter’s power port.
Connect the other end of the Power Cord to a power
outlet.
DC Power
1. Connect a DC power cable to the Terminal Block. (The
+VDC and GND can be connected to either terminal.)
2. Connect the other end of the DC power cable to a DC
power supply that su50VDC.
WARNING: Applying a negative voltage such as
‑48VDC will damage the radio.
3. Connect the DC power supply to its source.
Surge Protection
For added protection, install two surge suppressors, such
as the Ubiquiti Ethernet Surge Protector, model ETH‑SP,
at the end of each link. Install the first surge protector
within one meter of the airFiber DATA port, and install the
second surge protector at the ingress point of the location
housing the wired network equipment.
Ground to Pole, Tower,
or Grounding Block:
Max. 1 m from AF-11FX
M
ax. 1 m
airFiber PoE Adapter
EdgeRouter
™
Power Source
ETH-SP
ETH-SP
AF-11FX
Mounted on
AF-11G35