UAZ PATRIOT, Руководство по эксплуатации

Страница: 42 / 184

42
- coolant temperature in the engine (for dual needle cluster);
- fuel level in the fuel tank (for dual needle cluster);
- motor vehicle power supply voltage;
- motor vehicle total and daily mileage. Daily mileage counter
reset is performed by long (over 2 s) pressing the cluster switch;
- time of day (in 24-h format). To set the clocks, the "Clocks
setting" mode should be switched on in the trip computer. By
long pressing the cluster switch (over 2 s), the setting mode is
activated. Hours/minutes values can be set by turning the switch
clockwise/counter-clockwise. Switching over between hours/
minutes settings is performed by short (less than 1 s) pressing
the cluster switch;
- ambient temperature (depending on the package);
- date (in "XX month" format). To set the date, the "Date
setting" mode should be switched on in the trip computer. By
long pressing the cluster switch (over 2 s), the setting mode is
activated. Day, month and year can be set by turning the switch
clockwise/counter-clockwise. Switching over between day/
month/year/minutes settings is performed by short (less than
1 s) pressing the cluster switch;
- instantaneous fuel economy (l/100 km);
- average fuel consumption (l/100 km);
- fuel distance (in km);
- current motor vehicle speed;
- average motor vehicle speed
6 — coolant temperature indicator.
Engine operation with
the indicator pointer in the red range is not allowed. Range of
values from 50°C to 130°C. Division value 10°C.
7 - fuel level indicator.
FLOOR STANDING BOX WITH BLOCKS AND
CONTROL KEYS
Floor standing box with unit and keys control for motor
vehicles with the "Dymos" transfer case is shown in Fig. 3.7.
1 — transfer case mode switch.
Modes:
2H — only back axle drive. This mode is used to drive over
dry hard-surface roads;
4H — all-wheel drive. This mode is used to drive over wet
or slippery hard-surfaced road, off-road or terrain;