128
Gearbox
Regularly check threaded couplings (see Annex 2).
When leak is detected find out the reason and replace defective
parts (spacers, cups).
To check oil level, screw out plug 5 (see Fig. 9.21, 9.22).
The oil level should reach the filler orifice lower edge.
Upon oil replacement, drain oil immediately following the
motor vehicle shut-down while the aggregate is hot. Do not
forget to unscrew plug 5. Following plug 6 installation, replace
spacer.
Transfer case
Regularly check threaded couplings (see Annex 2).
When leak is detected find out the reason and replace defective
parts (spacers, cups).
To check oil level, screw out plug 9 (Fig. 9.21) or 8
(Fig. 9.22). The oil level should reach the filler orifice lower edge.
Upon oil replacement, drain oil immediately following the
motor vehicle shut-down while the aggregate is hot. For this it
is necessary to:
- wipe dry fill and drain plugs;
Fig. 9.20. Driving the clutch master cylinder:
1 — tank cap; 2 — tank housing; 3 — master cylinder housing; 4 — safety
cover; 5 — push rod; 6- nut; 7 — push rod sleeve; 8 — clutch release pedal;
9 — clutch switch off pedal
Содержание PATRIOT
Страница 183: ...Memo...