UAZ PATRIOT, Руководство по эксплуатации

Страница: 88 / 184

88
Chapter 6. STARTING AND SHUTTING DOWN
THe eNGINe
GENERAL REqUIREMENTS
WARNING!
It is strictly forbidden to start and warm up the engine
indoors without good ventilation in order to avoid carbon monoxide
poisoning.
It is forbidden to start the gasoline engine with improperly
installed high-voltage wires from the ignition coils to the spark
plugs or low-voltage wires to the ignition coils. It can cause failure
of the flywheel ring gear teeth and destruction of the starter.
For reliable start of the engine, viscosity grade of the engine oil
should correspond to the operating temperature range of the motor
vehicle
Before starting the engine, check for the coolant in the engine
cooling system, fuel, oil level in the engine crankcase and power
steering tank.
Shift the gearshift lever in neutral position.
Remember that (in order to prevent the starter from
accidentally switching on when the engine starts) the ignition
switch is equipped with the interlock, which allows the engine
to be restarted only when the key returns to "0" position (Fig.
3.4).
Switch on the starter for a maximum of 5 seconds. As soon
as the engine starts, immediately release the ignition key, it will
automatically return to "I" position. Warm up the engine.
It is forbidden to increase a crankshaft speed for acceleration
of the engine warming-up process.
Do not drive a motor vehicle with a cold engine.
The temperature of coolant must be not less than 60°C for
the warmed up engine of ZMZ-40906 family.
ZMZ-40906 ENGINE STARTING
Starting a cold engine at -20°C and above*
1. Turn on the ignition. It should activate the electric fuel
pump, which can be heard when the engine turned off.
2. If the engine turns on after prolonged stop, it is recommended
to wait until the electric fuel pump is switched off (about 5
seconds).