137
CONTROL SYSTEMS
Steering System
WARNING!
The disabled hydraulic power steering increases
the effort necessary for turning the steering wheel.
It is not permitted to turn off the ignition and remove the key
from the ignition switch while the motor vehicle is moving. The
steering system shaft is blocked by the anti-theft device when the
key is removed, and the motor vehicle is not controlled.
If the steering system does not work properly, it is not permitted
to drive the motor vehicle or to tow it with a tow-rope. In this case
use two wheel towing or tow truck service.
The steering mechanism can be used only for a short time
when the hydraulic power steering is broken as a result of the
pump damage, the hose or the pump drive belt malfunction or
when the motor vehicle is towed as a result of engine stop. If
the power steering system lacks oil, the pump drive belt should
be removed, otherwise a pump seizure or belt rip is possible.
Pay special attention to coolant temperature when the pump
drive belt is removed to avoid engine overheating.
Fig. 9.28. Rear wheel hub:
1 — wheel; 2 — wheel hub bolt; 3 —
wheel fastening nut; 4 — adjusting
nut; 5 — axle fastening bolt; 6 — lock
washer; 7 — locknut; 8 — thrust
washer; 9 — axle; 10 — journal; 11
— spacer; 12 — bearing; 13 — wheel
hub; 14 — thrust ring; 15 — brake
drum; 16 — impulse disc; 17 — ABS
sensor; 18 — thrust washer; 19 — cuff
wheel nut
Содержание PATRIOT
Страница 183: ...Memo...