174
Bolts and nuts of gearbox and transfer case
4,0-5,6
Nuts and bolts of propeller shaft flanges
4,4-5,6
Pin nut 8-10
Bolts of axle housing caps
1,1-2,5
Bolts of front axle hub flanges and rear axle shafts flanges
6,0-7,0
Ball struts bolts
3,6-5,0
Steering mechanism bolts
5,5-8,0
Nuts of steering trapezium ball studs
6,0-8,0
Tie rods locknuts
10,5-13,0
Nuts of steering system universal joints
2,8-3,6
M8 bolt of steering system propeller shaft
2,8-3,6
M10 bolt of steering system propeller shaft
4,8-5,6
Nut of steering system drag link
20-28
Front wheels journal bolts
3,6-4,4
Bolts of rear brake shields
4,4-5,6
Nuts of manifolds and brake hoses:
when screwing into aluminum, brass
and cast iron details
1,5-2,0
when screwing into steel details
2,8-3,6
Bypass valves of rear brakes wheel cylinders,
of front brakes crankcases, of proportioning valve
and of switch working cylinder for clutch
1,0-1,4
Switch working cylinder with plastic housing
0,7-1,0
Bolts of front disc brakes
14-16
Bolts of brake system proportioning valve and
coupling bolt nut of proportioning valve drive end
1,4-1,8
Bolt and locknut of drive flexible lever in brake
system proportioning valve, nut of drive lever axle
2,8-3,6
Nut of drive lever (in brake system proportioning
valve) to axle bracket and nut of end to pillar
0,65-0,8
Nut of longitudinal levers and suspension control arm
14-16
Spring U-bolts nuts
9-10
Nuts of spring axle
16-18
Nuts of spring studs
8,5-9,5
Wheel nuts
10-12
Adjusting nuts and locknuts of wheel hubs bearings
3,0-4,0
Lamp clusters nuts
0,15-0,25
Nuts of delphi power steering hoses
2,0-3,5
Nut of front spring joint
16-18
Steering wheel nut
3,2-3,6
Screws of locks and door locks catches
3,0-4,0
Annex 2 (end)
Note.
Use the following tightening torque for other threaded couplings:
M6 — (0,45-1,0) kgf•m;
M10 — (3,0-3,5) kgf•m;
M8 — (1,4-1,8) kgf•m;
M12 — (5,0-6,2) kgf•m.
Содержание PATRIOT
Страница 183: ...Memo...
