APT-5 - User’s Manual (EU) Rev. 2020-01 en
18
SECTION B – USER INFORMATION
10
OPERATION INSTRUCTIONS
NOTE: Install APT-5 for arms or legs exercise as described in the previous chapters.
10.1 Active mode - ISOKINETIC operation
10.2 Active mode - CONSTANT FORCE Operation
Insert the handgrips or footrests in one of the four mounting holes according to
the radius and range of motion required.
NOTE:
As the effective crank arm length is reduced in the ACTIVE mode, the
amount of effort required increases while the range of motion decreases, and
vice versa.
To activate the active mode from the stand-by position (after the electrical power
is supplied to the
APT-5
and the button is pressed): press the button.
The green ACTIVE mode indicator will light up.
Set the desired load level by pressing one of the selection push buttons,
to increase the level or to decrease the level.
Rotate the APT-5 handgrips or footrests forward or backward. Actual exercising
force is displayed as a percentage (%) on the Bar Indicator.
NOTE:
In this mode, an increase in the rotation speed (RPM) will lead to an
increase in the exercising force.
Press the button to activate the CONSTANT FORCE FUNCTION in the ACTIVE
mode. The green indicator will light up.
Set the desired load level by pressing one of the selection push buttons,
to increase the level or to decrease the level.
Rotate the
APT-5
handgrips or footrests forward or backwards. The exercising
force as displayed on the Bar Indicator will now remain constant at 50% for the
selected load level, irrespective of the crank arm rotation speed.
Step 1:
Step 2:
Step 3:
Step 4:
Step 1:
Step 2:
Step 3:
Содержание APT-5
Страница 1: ......
