Tzora APT-5, Руководство пользователя

Страница: 29 / 35

APT-5 - User’s Manual (EU) Rev. 2020-01 en 29
Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications
equipment
Test
frequency
(MHz)
Band
a)
(MHz)
Service Modulation
b)
Maximum
power (W) Distance
(m) IMMUNITY
TEST LEVEL
(V/m) Compliance
level (V/m)
385 380-390 TETRA 400 Pulse
modlation
b)
18
Hz
1.8 0.3 27 27
450 430-470 GMRS 460,
FRS 460 FM
c)
± 5 kHz de
viation 1 kHz
sine
2 0.3 28 28
710
745
780
704-787 LTE Band 13,
17 Pulse mod
lation
b)
217 Hz
0.2 0.3 9 9
810
870
930
800-960 GSM
800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5 Pulse
modulation
b)
18 Hz
2 0.3 28 28
1720
1845
1970
1 700 -
1 990 GSM 1800;
CDMA 1900;
GSM 1900;
DECT; LTE
Band 1, 3, 4,
25; UMTS Pulse
modulation
b)
217 Hz
2 0.3 28 28
2450 2 400 -
2 570 Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE Band 7 Pulse
modulation
b)
217 Hz
2 0.3 28 28
5240
5500
5785
5 100 -
5 800 WLAN 802.11
a/n Pulse
modulation
b)
217 Hz
0.2 0.3 9 9
NOTE: If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the
transmitting antenna and the ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m
test distance is permitted by IEC 61000-4-3.
a)
For some services, only the uplink frequencies are included.
b)
The carrier shall be modulated using a 50 % duty cycle square wave signal.
c)
As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not
represent actual modulation, it would be worst case.