APT-5 - User’s Manual (EU) Rev. 2020-01 en
16
>>
Connect the power output connector (Figure 12-1) of the power supply (Figure 12-
4) to the
APT-5
power input socket (Figure 12-2a) while ensuring correct position
of connector groove opposite the guide key of socket (Figure 12-2b).
NOTE:
The
APT-5
must be used only with an original
APT-5
Power Supply unit.
Insert Footrest (Figure 13-1) in one of the four mounting holes (Figure 13-2) in
each of the
APT-5
crank arms. Installation or removal requires only a straight
push or pull while simultaneously pressing on the release pin (Figure 13-3) as
shown. Secure feet in place with straps fastened diagonally as shown in Figure 10.
NOTE:
The choice of mounting hole provides variable resistance levels and ranges
of motion. See operation instructions.
Plug the power supply mains power plug into the electrical socket outlet (Figure
10-3). The
APT-5
will enter a stand-by position.
To start operating
, press the button. The
APT-5
will enter the stand-by
position. Then press the button. The green ACTIVE mode indicator will light
up. You may start exercising in the ACTIVE mode. For operation instructions, see
5.1 & 5.2.
NOTE: If the
APT-5
moves across the floor during leg exercises, anti-slip pads
(Figure 8-3) may require cleaning. If possible – use the
APT-5
on a carpet or rubber
mat.
Step 4:
Step 5:
Step 6:
Содержание APT-5
Страница 1: ......