APT-5 - User’s Manual (EU) Rev. 2020-01 en
14
>>
Install the finger protection discs (Fig. 8-1) by sliding them into the grooves on the
outside edges of the crank arms (Figure 8-2) in the direction shown.
NOTE: The finger protection discs are important for safe opera tion of the unit
during hands exercise.
Insert handgrip (Figure 9-1) in one of the four mounting holes (Figure 9-2) in each
of the APT-5 crank arms. Installation or re moval requires only a straight push or
pull while simultaneously pressing on the release pin (Figure 9-3) at the end of
the handle.
NOTE: The choice of mounting hole provides variable resistance levels and ranges
of motion. See operation instructions.
Plug the power supply mains power plug into the electrical socket outlet (Figure
5-3). To start operating, press the button.
The
APT-5
will enter the stand-by position. Then press the button. The
green ACTIVE mode indicator will light up. You may start exercising in the ACTIVE
mode. For operation instructions, see 5.1 & 5.2.
NOTE:
If the
APT-5
moves across the table during arm exercis es, anti-slip pads
(Figure 8-3) may require cleaning.
Step 4:
Step 5:
Step 6:
Содержание APT-5
Страница 1: ......
