APT-5 - User’s Manual (EU) Rev. 2020-01 en
15
SECTION B – USER INFORMATION
08
INSTALLATION FOR USE – LEG EXERCISE
Position the
APT-5
on the floor close to an electrical socket outlet (Figure 10).
Loosen the angle-securing knob (Figure 10-1) and adjust the
APT-5
to the required
angle. To increase the angle, lift the body of the
APT-5
, allow it to “click” into
one of the operating positions and retighten the securing knob. To decrease the
angle, pull the angle release knob (Figure 11), lower the body of the
APT-5
, al low
it to “click” into another operating position and tighten the se curing knob.
CAUTION: Make sure that the minimum distance between crank arm and the
floor surface is approximately 5 cm. / 2” (Figure 10-2)
Place a chair at the desired distance from the
APT-5
. If necessary, attach the
Securing straps (Figure 10-6) between the
APT-5
base rings (Figure 10-5) and the
chair legs to prevent any change in distance between the
APT-5
and the chair
during leg exercises.
Step 1:
Step 2:
Step 3:
Содержание APT-5
Страница 1: ......
