43
5. Inspect the fuse for failure. If found defective
Replace the blown fuse with a new (extra fuses
are provided in the wiring harness itself in a
pouch).
6. Close and refit the fuse case back to its position.
7. Turn ‘ON’ the ignition lock and check for proper
functioning of the electrical systems. lncase the
fuse fails again, consult the nearest TVS Motor
Company Authorised Main Dealer / Authorised
Dealer.
Do not use vehicle by shorting the wires without fuse.
This may result in overheating of electrical items / wiring
and may result in fire of vehicle.
Do not use fuse of higher amperage than specified for
the safety of electrical system.
Caution
SPARK PLUG
To access the spark plug, the cover front has to be
removed. Follow the bellow procedure to remove the
cover front.
1. Remove the bottom mounting screws (A) of
cover front.
2. Open the seat and remove the top mounting
screws (B) from both the sides of cover front.
3. Gently pull out the cover front by dislocating its
lugs.
4. Clean the dust and mud around the spark plug
mounting to avoid falling inside the cylinder.
Good Fuse
Blown Fuse
A
A
B