21
4. Set clock mode
To enter the set clock mode, press ‘Mode’ button
for more then 5 secs. The digital clock starts blinking
once the instrument cluster enters the set clock
mode.
• Press the ‘Mode’ button while the digital clock
is blinking. The hour digits of clock starts blinking
and enables you to change the hours.
• Press the ‘Set’ button to increase the hours while
hour digits are blinking.
• On pressing the ‘Mode’ button again the hours
gets set and the minute digits starts blinking.
• Now, press the ‘Set’ button to increase the
minutes while minute digits are blinking.
• Once again press the ‘Mode’ button so the
minutes of the clock is set and the hours format
‘AM’ or ‘PM’ starts blinking.
• Press the ‘Set’ button to change the hour format
either to set ‘AM’ or ‘PM’.
• Press the ‘Mode’ button once again to set clock
and wait for 5 secs to come out of set clock
mode.
In this mode, if the vehicle speed crosses above 2
km/h, instrument cluster will enter to ‘STREET MODE’
automatically.
If no input is given for more than 5 secs while the set
clock mode is in operation, the instrument cluster comes
out of this mode automatically.
Note
