50
Brake shoe wear indicator (Rear brake)
When brake is applied, the wear limit indication
pointer (1) on the rear brake cam lever should be
within the wear limit indicator (2) on the crankcase
LH.
In case the wear limit indication pointer (1) is going
beyond wear limit indicator (2), index the lever to next
slot with the help of Dealers to extend shoe life.
1
Replace the brake shoes as a set, if the wear limit
indicator shows beyond the wear limit even after
indexing the lever.
Caution
2
TYRES
Tyre pressure
Check the tyre pressure atleast once in a week if not
more frequently. Insufficient air pressure in the tyres
not only hasten tyre wear, but also seriously affects
the stability of the vehicle.
Under inflated tyres make smooth cornering difficult
and over inflated tyres decreases the tyre contact
with the ground which can lead to skidding and loss
of control.
Be sure that the tyre pressure is within the specified
limit at all times.
Tyre pressure in cold condition:
Solo Dual
Front
1.69 kg/cm² (24 PSI) 1.69 kg/cm² (24 PSI)
Rear
1.97 kg/cm² (28 PSI) 2.53 kg/cm² (36 PSI)
Tyre tread condition
Operating the vehicle with excessively worn tyres
will decrease riding stability and can lead to loss of
control. It is recommended to replace the tyre when
the tyre wears off to the tyre wear indicator level
(indicated by TWI (A) on the tyre).
