48
Replace the brake shoes as a set, if the wear limit
indicator shows beyond the wear limit even after
indexing the lever.
Caution
Since the vehicle is fitted with Synchronised Braking
System (SBS) adjust the brakes with additional care.
If not it may result in brakes not working properly.
Please contact TVS Motor Company Authorised
Main Dealer or Authorised Dealer for any further
assistance.
Warning
6. After adjusting the adjuster nut top, if any
clearance is observed in between the bullet
bottom (5) and the slot bottom (6) marked as
“I” as shown, then turn the adjuster nut (2) in
anti-clockwise until there is no clearance.
7. Once again check and confirm the brake play at
the lever end.
Brake shoe wear indicator front
When the brake is applied, wear limit index mark (1)
on the front brake cam should be within the wear
limit indicator (2) on the front brake panel.
Incase the wear limit index mark (1) is going beyond
wear limit indicator (2), index the lever to next slot
with the help of the Dealer to extend the shoe life.
S
I
Clearance
Clearance
1
2
5
6
1
2
