10
Power indicator (amber lamp) indicates that the
vehicle is running in power mode which results in
reduced fuel economy.
Power indicator will also glow if engine is stalled
using kill switch.
2. High beam indicator lamp ( )
Glows when the head lamp is activated in high beam
or pass-by condition.
3. Turn signal indicator left ( )
Flashes when the ‘left’ side turn signal indication is
activated.
4. Turn signal indicator right ( )
Flashes when the ‘right’ side turn signal indication is
activated.
Always ride the vehicle in ‘Economy Mode’ for better
fuel efficiency.
Whenever the engine is kept running in idle mode for
more than 20 seconds approximately, the power mode
indicator blinks and informs you that the fuel is getting
wasted and the engine needs to be switched ‘OFF’ to
save the fuel.
Note
5. Low fuel indication ( )
The low fuel indicator glows when the fuel level
reaches empty level, and a message ‘FUEL EMPTY’
will be displayed at alpha numeric display.
Caution
When the low fuel warning indicator lamp glows
fill fuel in the fuel tank immediately to avoid engine
switch OFF / damage to fuel pump which leads to
replacement of pump without warranty.
6. Malfunction indicator lamp - MIL ( )
MIL is turned ON when the ECU detects a fault in
the system.
The malfunction indicator will continue to remain
switched ‘ON’ after self checking of cluster until the
engine is started. But after starting the engine it will
get switch ‘OFF’ if no malfunction is detected.
Note