8
CONTROL KEY
TVS NTORQ 125 comes with a pair of identical
control keys. These keys are to operate ignition cum
steering lock, fuel tank cap and seat lock.
IGNITION CUM STEERING LOCK
The ignition lock enables and disables the electrical
circuit and steering lock. The three positions of the
lock are described below.
1. ‘OFF’ position
All the electrical circuits are turned ‘OFF‘ in this
position. Engine will not start. Key can be taken out.
2. ‘ON’ position
In this position, all the electrical circuits are turned
‘ON’ and the engine can be started now. Key cannot
be removed in this position.
The instrument cluster and warning lights perform
the self-diagnostic cycle once upon activation.
3. ‘LOCK’ position
TVS NTORQ 125 steering can be locked in both ‘left’
and ‘right’ directions.
Turn the handlebar to the ‘left’ or ‘right’. Press the key
‘IN’ and rotate it to the ‘LOCK’ position from ‘OFF’
position. All electrical circuits are deactivated and the
steering is locked. The control key can be removed
from the lock.
When you switch on the key, the pump priming noise may
be heard, which is normal. Avoid frequent SWITCH-OFF &
ON of ignition key, to avoid unnecessary run of fuel pump.
The instrument cluster background illumination, day time
running lamp (DRL) and tail lamp glow automatically
once the ignition key is turned ‘ON’ without activating
any other switches.
When the ignition switch is turned ‘ON’ the instrument
cluster performs self diagnostic cycle. Wait till the
message ‘HELLO RIDER‘.
Note
P
U
S
H
L
O
C
K
