23
Ensure brake lock is released before riding the vehicle.
Use appropriate head lamp beam ‘high / low’ as per
the traffic and road conditions for your safety and avoid
inconvenience to other riders.
Warning
To activate brake lock, press the brake lever almost
half towards the grip and hold, then press the parking
brake lever to maximum and release the brake lever
slowly. Ensure the brake is locked properly. Pressing
the brake lever further releases the brake lock
automatically.
5. High/low beam cum pass by switch
With the head lamp ‘ON’ (incase of Race edition,
headlamp gets on automatically once the engine is
started), press the switch towards ‘ ’ to operate
head lamp high beam or press it towards ‘ ’ to
operate head lamp low beam.
TVS NTORQ 125 has a combined switch for head lamp
‘high / low’ beam and pass by. To operate the pass by,
keep the switch in ‘low beam’ position, press gently
and release. This makes the head lamp high beam to
flash and signal the approaching vehicle. The pass by
signal can be used while overtaking during day time.
HANDLE BAR RIGHT SIDE
1. Right hand brake lever
Incase of disc brake vehicles the right hand brake
lever controls a hydraulic circuit while squeezing and
the hydraulic circuit operates the front brake system.
Else the brake system works directly. The brake lamp
glows on application of front brake.
2. Throttle grip
Engine speed is controlled by the rotation of the
throttle grip. Twist it towards you to increase the
engine speed and twist it away from you or release it
to decrease the engine speed.
1
2
4
5
3
