TV One C2-8000 Series, Руководство по эксплуатации

Страница: 45 / 136

C2-8000 S
ERIES
O
PERATION
M
ANUAL
41
Your unit can handle a very wide array of inputs and convert them all to a single
output signal with defined characteristics. This output resolution will remain in place
until changed or it may be overridden by the lock mode and source.
The top line of the display will show the current output resolution selected. Some
units will have a limited number of output resolutions depending on their function
(e.g. Down Converters are more limited than Video Scalers).
HDCP is handled only on certain units with DVI outputs, so this menu may not
appear on your own unit. HDCP is a ‘High-bandwidth Digital Content Protection’
system, which can ensure that a high definition video signal cannot be received by
units not equipped with a HDCP receiver.
This menu lets you see the current status of the output and whether HDCP is
supported or active, and also lets you turn off the output’s HDCP encryption
system. Note, however, that turning HDCP off at the output will also prevent
HDCP-encrypted signals from being received by the unit – see the table below.
By default, HDCP on the output is turned On - so that if your attached DVI display is
HDCP-compliant, then your output will be encrypted (regardless of whether the
input to the scaler is encrypted). Note that you don’t have to attach a display to the
output of the scaler – another unit can be connected instead, in which case that unit
is known as a ‘repeater’.
It is important to note that if your source is HDCP encrypted (for example, from a
Blu-ray player) then you cannot output any un-encrypted signals that use this
source (such as SDI, analog YPbPr, etc.). Only HDCP-encrypted DVI or HDMI can
be output. Therefore if your source is encrypted then you must ensure that this
HDCP setting is On and that your display is HDCP compatible.
Please also see the HDCP menu item in ‘Adjust sources’, as this controls
availability of HDCP at the DVI input.
The status message given in brackets has the following meaning:
1024 x 768 60Hz
HDCP (Active) On