TV One C2-8000 Series, Руководство по эксплуатации

Страница: 58 / 136

C2-8000 S
ERIES
O
PERATION
M
ANUAL
54
The color of the border can be changed to any color by adjusting the Y, U and V
parameters. Y is the luminance, with U and V altering the blue and red content
respectively. E.g. increase both U and V to give a purple colour, or decrease both
to give a green colour.
This parameter controls how visible the border is to the viewer. A setting of 0
renders the border invisible (transparent) whereas a setting of 100 makes the Logo
fully visible. (In-between settings can give the Border a transparent appearance.)
9.9 Items Associated with the Adjust sources group
The ‘Adjust Sources’ menu group accesses the parameters associated with the
processing amplifiers used for each input (RGB, CV, YC, etc.). They allow you to
fine-tune an incoming signal to optimize its color, brightness or even sharpness.
Not all settings are available for all input types, and not all input types listed here
may be available on your unit. Also note that many of these adjustments may not
show without ‘Advanced menus’ set to On.
It is recommended that you Store your settings once you’re happy with them in
readiness for future use.
This menu item selects the input connection for which you want to make
adjustments to. As in the image above, changes will only be made to the source
connected to RGB1. Once the selection has been made, all changes made using
the following operating parameters will only apply to the selected input.
Selection of a CV/YC source will reveal different menu items that allow adjustments
beyond those used for RGB sources. The menu discussions that follow relate first
to RGB sources, then to CV / YC type sources.
9.9.1 Menu items common to all inputs
Source: RGB1
Aspect correct [ Fill]
Source: RGB1
Source to adj
[RGB1]
Adjust borders
Brdr Y/U/V [16] [128] [128]
Adjust borders
Brdr opacity %
[100]