TV One C2-8000 Series, Руководство по эксплуатации

Страница: 34 / 136

C2-8000 S
ERIES
O
PERATION
M
ANUAL
30

Analog RGBS (separate sync at TTL levels)

Analog YUV/YPbPr (including tri-level)
For DVI-D, RGBHV, RGBS, RGsB and CV the particular input being used will be
auto-detected.
For all signals except DVI-D, an adaptor cable is required for use. See ‘Connector
pin-outs’ for more information.
CV and YC sources can be either standard NTSC, PAL or SECAM inputs – for
example, from a video camera, VCR, DVD player, gaming device, etc. PAL and
NTSC detection is automatic, SECAM must be selected in the ‘Adjust sources’
menu.
The DVI-D input accepts DVI digital connections (but on a DVI-I socket for added
flexibility). An EDID signal is used to ensure that the PC or DVD player outputting
the DVI signal knows the available range of resolutions in the unit.
To enable an input for HDMI usage, set the ‘EDID to use’ to [HDMI] in ‘Adjust
sources’. Once active, the DVI-U input will also accept audio via the HDMI link.
The table below shows how to select a particular input using the ‘Adjust source’ /
‘Input type’ menu:
Source Connection Input type setting
DVI-D DVI-U Auto / D-RGB
HDMI* DVI-U Auto / D-RGB / D-YUV
RGBHV / RGBS / RGsB DVI-U Auto / A-RGB
YPbPr / YUV DVI-U Auto / A-YUV
CV DVI-U on ‘Green’ Auto / A-CV
Y/C DVI-U on ‘Blue’/’Red’ A-YC
*For HDMI, also set ‘EDID to use’ in ‘Adjust sources’ to [HDMI]
7.3 Computer & Video outputs
The DVI-U outputs can be:

Digital DVI-D or HDMI signals

Analog Composite Video

Analog Y/C (S-Video)

Analog RGBHV (separate syncs at TTL levels)

Analog RGsB (sync on green)

Analog RGBS (separate sync at TTL levels)

Analog YUV/YPbPr (including tri-level)
When the output resolution (as set in ‘Output res’) is set to PAL or NTSC, then the
DVI-U connectors will output the Composite Video and Y/C signals. For all other
resolutions, the output type is set in the ‘Adjust outputs’ menu.