TV One C2-8000 Series, Руководство по эксплуатации

Страница: 30 / 136

C2-8000 S
ERIES
O
PERATION
M
ANUAL
26
Button Button Function
Menu navigation &
adjustment
buttons.
Up / down / left / right / SELECT allow quick and easy access
to various menu settings. Press and hold SELECT to store
current settings into memory. They will then be restored on
power-on, or when a Restore is done. See next section for
more information.
PROGRAM 1/A
Sources
Selects one of the (up to 12) input sources for display. In
Switcher mode, the Program output will transition to this input
without the need for TAKE to be pressed. In other modes, it
selects the source to use for Window A.
PROGRAM 2/B
Sources
Selects an input for display. In Switcher mode, it allows
viewing of the next source on the Preview output. In other
modes, it selects the source to use for Window B.
Presets 1 to 7 Recalls a preset. These start off blank, but are available to
the user. Hold the button in to store the current settings in
that Preset. Hold for even longer to reset that Preset back to
factory defaults.
KEY Enables keying for currently selected window – see ‘Adjust
keyers’ menu.
(Key color defaults to black, so black foreground will
disappear.)
ZOOM Jumps to the ‘Zoom’ menu item.
FADE Fades out the current image – fades back in on next press.
FREEZE Freezes the currently selected window
ASPECT Changes the aspect ratio of the currently selected window.
POS Jumps to the Pan or Pos menu item to allow immediate
panning or positioning of the image.
PIP Activate picture-in-picture mode for the currently selected
window.
SIZE Jumps to the ‘Shrink’ menu item to allow the current window
to be re-sized.
ON/STANDBY Hold in to put the unit into Standby (power-save) mode.
Press once to come out of Standby mode.
6.2 Special button combinations and functions
In addition to the ability to perform a factory reset and forcing certain output
resolutions, other button combinations are available:
These button combinations only work when the unit is switched on and active i.e.
with the STANDBY/ON LED is off. They will not work in Standby mode, or during
power-up.
6.2.1 Saving current settings
Press and hold the SELECT button until a beep is heard and the unit shows
‘Settings stored’.