TV One C2-7100, Руководство по эксплуатации

Страница: 34 / 150

27
Button
Number
C2-7100
default
C2-7200
default
C2-7300
default
3 RGB1 RGB1 RGB1
4 RGB2 RGB2 RGB2
5 RGB3 CV1 CV1
6 CV1 CV2 CV2
7 CV2 YC1 YC1
8 YC1 SDI1 SDI1
9 YC2 SDI2 SDI2
10 TC1 TC1 TC1
All buttons except the Shift button and Power Button can be reassigned;
however, buttons “1” and “2” should not be changed since such a change will
make operation of the unit via the Rotary Encoder Control more difficult.
The unit is controlled from the front panel by using the rotary knob and the
LCD screen. The Rotary encoder knob has two functions, rotate to navigate
through the menu structure and push to enter a sub menu or change a
parameter.
Parameters that can be altered are indicated on the LCD screen by “[ ]”
brackets, simply press the rotary knob and these brackets will flash indicating
the parameter can be adjusted, then rotate the knob to adjust and when the
require setting is shown press the rotary knob again to end the adjustment.
The settings for the unit can be saved at anytime by pressing and holding the
rotary knob until the screen shows the screen:
In order to facilitate ease of use, the first two characters of every menu
indicate the current Output and Window that is being adjusted; i.e. 1A =
Output 1, Window A. In order to quickly change between the Window and
Output under adjustment, the first programmable button (1) is programmed to
cycle through the windows: A->B->Z>A … and this same key (when the shift
key is also pressed) cycles through the Outputs 1->2->1… If you ever get lost
as to which window is 1A, etc., simply pressing shift and button (2) will
highlight the window on its associated output by placing a border around it.
Info :
Settings stored