TV One C2-7100, Руководство по эксплуатации

Страница: 102 / 150

95
11.5.3 Run and Restore macros
Macros once programmed can be run by sending one of the following
commands. By running macro 5 the unit can be restored to its previously
saved state, when used in conjunction with the other macros this allows a
default setup or baseline for the unit to be created.
Packet sent Packet returned
SOP CMD CHA WIN OUT FUN PAY CS EOP SOP CMD CHA WIN OUT FUN PAY CS EOP
Restore
F
04 05 42 00 F1 000000 3C CR F 44 05 42 00 F1 000000 7C CR
Run macro 1
F
04 00 42 00 F1 000000 37 CR F 44 00 42 00 F1 000000 77 CR
Run macro 2
F
04 01 42 00 F1 000000 38 CR F 44 01 42 00 F1 000000 78 CR
Run macro 3
F
04 02 42 00 F1 000000 39 CR F 44 02 42 00 F1 000000 79 CR
Run macro 7
F
04 07 42 00 F1 000000 39 3E F 44 02 42 00 F1 000000 7E CR
11.5.4 Emulate a front panel button press
This is performed using function code 0x24F and the following payload codes
(requires firmware version 287 onwards). Note that not all button presses are
relevant to your unit.
Button press Payload
Power down 0400E1
Power back on – see Reset command. N/A
Reset menu settings to power-on values 0100E2
Reset menu settings to factory defaults 2300E2
Lock / unlock front panel buttons 0100E3
Set to NTSC output 0000E7
Set to PAL output 0000E8
Set to default output resolution for unit 0000E9
Set to 480p output 0000EA
Set to 720p 59.94Hz output 0000EB
Set to 720p 60Hz output 0000EC
Cycle presets (demo mode) 0100EE
Select DVI-I1 as source 000200
Select DVI-I2 as source 000201
Select DVI-I3 as source 000202
Select DVI-I4 as source 0002A2
Select CV1 as source 000203
Select CV2 as source 000204
Select CV3 as source 000205
Select YC1 as source 000206
Select YC2 as source 000207