Turnigy PRM0282, Руководство пользователя

Страница: 31 / 60

2.8
<1>
Attach a few zip ties to hold them together and install the anti-chafe loom by wrapping
the wires (
pictures 2.8d and 2.8e )
Cut the anti-chafe loom 5 inches from the end of the wires. Now move the extrusion
head to the front left position and lay the wire in the back panel slot, making an “L”
shape (
picture 2.8f and 2.8g) . This “L” shape will give the required slack for the print
head to move around and the wires not to blind.
Picture 2.8d Picture 2.8e
Picture 2.8f Picture 2.8g
With the “L” shape in place zip tie the wire loom down the back side on the 3 points cut
out for the zip tie on the back panel (
picture 2.8h )
Picture 2.8h
31