Turnigy PRM0282, Руководство пользователя

Страница: 27 / 60

2.7
<1>
The next step is to install the X-axis drive belt. Find the bag with 3 belts in Box-G.
There are 2 short belts and 1 long belt, we need to long belt for this step.
Start first by laying the wires coming from the extruder head to the front of the printer to
give an unobstructed access to the belt area (
picture 2.7a ).
We need to route the belt around the motor sprocket with the long side toward the back
and the short end toward the front. The ribs of the belt are toward the inside or face
each other (
picture 2.7b ).
Picture 2.7a Picture 2.7b
Timing belt (Long)
ETP0110
Find the following accessories from: Box G
Picture 2.7b
Picture 2.7a
Picture 2.7c, 2.7d
Picture 2.7e
27