Turnigy PRM0282, Руководство пользователя

Страница: 30 / 60

2.8
<1>
We need to run all the wiring for the control panel now before we install the front and top
panels.
First, we need to bundle the top wires together and install an anti-chafe loom (spiral cut
cable loom) around them.
Spiral cut cable loom
Box G
Find the following accessories from:
Referring to the picture 2.8a we need to gather the front fan wires (thin wires from the
front fan that magnets on), extruder heater (thick red wires), temperature sensor
(thin black wires coming from the extruder cover by the thick red wires), extruder
wires (multi-colored 4 wires), and the rear fan (thin red and black).
Extruder heater wires
Picture 2.8a
Rear fan wires
Temperature sensor wires
Extruder wires
Front fan wires
First zip tie the front fan, extruder and temperature sensor wires to the extruder top plate
(
picture 2.8b ). Bring them across the top, have the extruder motor wires and rear fan wires
come up and join the other wires ( picture 2.8c ).
Picture 2.8b Picture 2.8c
Zip tie
30