Radio Setup 2 (page 2/11)
This page deals with a number of additional settings.
Volume
This value may be set from 0 to 23. The volume of the beeps as you change the setting shows
the new value. Note that within Model Setup, further control of volume can also be assigned to
one of the three pots (P1, P2, P3) or a Global value (GV4 to GV7).
Speaker Pitch
Values from 1 to 100 may be set. The pitch varies one tone up for every five value increments.
Haptic Strength
Values from 0 to 5 may be set. This parameter determines the strength of the vibration.
Brightness
This refers to the screen brightness when the backlight is switched on. Values from 0 (fully dark)
to 100 (very bright) may be set.
Capacity Alarm
When the battery capacity used since last reset reaches this value an alert message will be
announced. Battery capacity used may be viewed and reset on the Battery screen (one long
press UP from any of the Home screens).
Bt Baudrate
Speed setting for Bluetooth communications (Bluetooth requires additional hardware).
Rotary Divisor
The amplification of a rotary encoder may be set here. The range of values is 1,2, and 4. This
value depends on the make of the encoder. A rotary encoder is not included in the 9XR Pro but
can be added as a DIY project.
Stick Gain
This is only needed if another type of stick gimbal, such as Aurora 9, is fitted to the transmitter.
‘LV’ means Left Vertical, etc. If necessary, individual sticks can be reversed in the Mode section
of the Radio Setup menu.
Ersky9x Explained – version 1
page
16
of 45
