form the channel outputs. These bars reflect the outputs resulting from the programming for the
particular model processing the inputs of the sticks, pots and switches.
Note that just above the channel output graphic is a bar showing which channels are being
displayed. A short press of the
RIGHT or LEFT key changes the channel view from the first set of 8
channels (1-8) to the second set (9-16) and then to the third set (17-24). With the necessary
hardware, the transmitter is capable of controlling 24 channels.
Warning
: It’s easy to give a short right press inadvertently and display channels not being used on
your transmitter. This can be very confusing.
Home Page 3 (Numeric Servo Outputs)
In the third Home page (short press down from the previous screen) the lower half of the screen
shows the channel outputs in digital form from -100% to +100%.
Again, the bar shows which channels are being displayed (here 1-8). The upper part of the screen is
identical to the previous screens.
Home Page 4 (Timers)
In this Home page the lower half displays just the Timer 2 reading in bold type for easy visual
reference.
Ersky9x Explained – version 1
page
4
of 45
