Home Page 5 (Telemetry Series)
In the fifth Home page (short press down from the previous one) the screen shows various sets of
telemetry data. These may include Global Positioning System (GPS) data, voltage, temperature, rate
of climb, battery capacity used or other information, depending on what sensors you have installed in
your model.
A long press of the MENU button will reset the maximum altitude and maximum speed readings to
zero. For further information on telemetry see page 36.
A short press of the RIGHT or LEFT key will cycle among the five Telemetry screens, which you can
adapt to suit your requirements. Consequently, the information in the screens may vary from what is
shown below.
The next page (not shown) has the upper half as described before and the lower half a customizable
value, which may be a timer or a telemetry value or other variable.
The last Telemetry screen provides for information specific to the DSM protocol and is intended for
use with a DSM telemetry transmitter module. It only appears when DSM2 or DSMX operating mode
is selected in the Model Setup Screen (1/13).
A short press of the UP or DOWN key will take you back to the Home screens and allow you to cycle
through them.
Ersky9x Explained – version 1
page
5
of 45