Turin TKB80306 страница 66 Скачать руководство пользователя

Страница: 66 / 90

Chapter 5 Process technology

Turing industrial robots provide special process software packages for several

different applications, including: welding, palletizing, spraying, and visual tracking. Turing

will provide as many process software packages as possible according to the needs of the

actual application.

5.1 Welding process

5.1.1 Welding process description

At present, the welding process software package provided by Turing is mainly aimed

at the field of arc welding. The industrial robot cooperates with the automatic wire feeding

device and the welding power supply lamp to perform welding operations for various

space welds. It has the characteristics of long-term welding operations, high productivity,

high quality and stability of welding operations.

5.1.2 Welding parameter setting

Before the robot control system can control the welding machine, it is necessary to

make corresponding settings according to the basic characteristics of the welding machine

and the connection circuit between the welding machine and the control cabinet.

In the main menu, select

【

Process

】

, and then select

【

Welding Process

】

, you can set

the welding process parameters, including: basic settings, arc starting (welding) arc

extinction, swing arc settings, voltage matching table and current matching table.

Basic settings:

including welding trial operation and anti-collision detection

Welding test run: In the automatic state, if the welding test run is checked, the welding

command will not start arc welding.

Anti-collision detection:

Selective detection using anti-collision welding torch. If the

torch collides, the anti-collision sensor will act and the system will alarm. The detection

function can be cancelled and the alarm can be cancelled. At this time, the robot can be

used as a welding torch to leave the collision point. Check the detection and continue to

use the anti-collision detection function.

Содержание TKB80306



























































































Результаты поиска

Содержание TKB80306

Отзывы:

Похожие инструкции для TKB80306

Бренды по названию

Популярные бренды

Turin TKB80306, Техническое руководство

Результаты поиска

Содержание TKB80306

Отзывы:

Похожие инструкции для TKB80306

Бренды по названию

Популярные бренды