TuffStuff CFM-550 Скачать руководство пользователя страница 25

Страница: 25 / 28

Fig. 72

Back Pad (#32)

adjustment

1. Grasp the

Back Pad (#32).

2. Pull the Push Pull Pin 1/2” X 3-1/2 (#38) to release the

Back Pad

Bracket (#12)

from the

Front Upright (#5)

3. Adjust the

Back Pad (#32)

to one of the three available positions.

4. Release the Push Pull Pin 1/2” X 3-1/2 (#38) and make sure it fully

engages into the selected hole of the

Back Pad Bracket (#12).

Fig. 73

Seat Pad (#33)

adjustment:

1. Grasp the

Seat Pad (#33).

2. Turn counterclockwise then pull the Turn/Pull Pin w/Knob (#39) to release

the

Bench Press Adj. Seat Tube (#9)

from the

Leg Extension Bench

Frame (#4)

3. Adjust the

Seat Pad (#33)

to a desired height.

4. Release the Turn/Pull Pin w/Knob (#39) and make sure it fully engages

into the selected hole of the

Bench Press Adj Seat Tube (#9).

Complete the adjustment by turning the Turn/Pull Pin w/Knob (#39)
clockwise.

Adjustment Features

Fig. 74

Locking the

Leg Extension Arm (#8)

1. Locate the L-Locking Pin (#79).
2. Insert the L-Locking Pin (#79) through the

Leg Extension Bench

Frame (#4)

and the

Leg Extension Arm (#8)

, as shown above.

Unlocked Leg Extension Arm used on Exercises:

♦

Leg Extension

♦

Leg Curl

Locked Leg Extension Arm used on Exercises:

♦

Low Row

♦

Standing Arm Curl

♦

Inner / Outer Thigh

♦

Seated Row

♦

Seated Chest Press

♦

Seated Shoulder Press

Fig. 75

Weight Selection

1. Grasp the Weight Selector Pin (#31).
2. Insert the Weight Selector Pin (#31) into desired

Weight Plate.

The

Decal Weight Number (#87) on the selected

Weight Plate

will show

the amount of weight selected. The

Top/Plate Selector Bar (#26)

must be resting on top of the Weight Stack.

3. Make sure the Weight Selector Pin (#31) has been fully inserted into

the selected

Weight Plate

CFM-550 Compact Frontal Machine

Содержание CFM-550





























Результаты поиска

Содержание CFM-550

Отзывы:

Похожие инструкции для CFM-550

Бренды по названию

Популярные бренды

TuffStuff CFM-550, Руководство пользователя

Результаты поиска

Содержание CFM-550

Отзывы:

Похожие инструкции для CFM-550

Бренды по названию

Популярные бренды