FIG. 53
Secure the
Foot Roll Tube 1 X 16 (#18)
to the
Bench Press
Adj. Seat Frame (#9)
using a Set Screw 1/4-20 X 1/4 (#43). Use the
supplied Hex Key 1/8” (#86) for securing the Set Screw 1/4-20 X 1/4 (#43)
into the threaded socket located on the
Bench Press
Adj. Seat Frame
(#9).
Note:
Refer to
Fig. 67
on page 19 for further illustration of this
assembly.
FIG. 55
insert one Foam Foot Roll 7 X 4 X 1 (#46) onto each end of
the three
Foot Roll Tubes
, as shown above. Refer to the Exploded View
Diagram on page 21 for further clarification of this assembly.
FIG. 52
Next, insert one
Foot Roll Tube 1 X 16 (#18)
into the recepta-
cle located on the
Bench Press
Adj. Seat Frame (#9)
. Then, insert the
other
Foot Roll Tube 1 X 16 (#18)
into the receptacle located on the
Leg
Extension Arm (#8)
. Next, insert the
Foot Roll Tube 1 X 23-3/4 (#19)
into the receptacle located on the
Adjustable Back Pad Bracket (#12)
,
as shown above. Be sure all these tubes are centered at the receptacles
from end-to-end.
CFM-550 Compact Frontal Machine
15
FIG. 54
Secure the
Foot Roll Tube 1 X 23-3/4 (#19)
to the
Adjustable
Back Pad Bracket (#12)
using a Set Screw 1/4-20 X 1/4 (#43). Use the
supplied Hex Key 1/8” (#86) for securing the Set Screw 1/4-20 X 1/4 (#43)
into the threaded socket located on the
Adjustable Back Pad Bracket
(#12).
Note:
Refer to
Fig. 68
on page 19 for further illustration of this
assembly. In addition, a measuring tape is used to center the
Foot
Roll Tube 1 X 23-3/4 (#19)
. The measurement from one end of the
tube to the receptacle, as pictured above, should be about 10-1/2”.
10-1/2”
Содержание CFM-550
Страница 20: ...FIG 64 FIG 65 FIG 66 FIG 67 FIG 68 FIG 69 CFM 550 Compact Frontal Machine 19...
Страница 21: ...CFM 550 Compact Frontal Machine 20 CFM 550 CABLE MAPPING DIAGRAM FIG C FIG A FIG B FIG D...
Страница 22: ...CFM 550 EXPLODED VIEW DIAGRAM CFM 550 Compact Frontal Machine 21...
Страница 27: ...CFM 550 Compact Frontal Machine 26 N o t e s...
