S
afety
F
irst
Regardless of how enthusiastic you may be about getting on
your equipment and exercising, take the time to ensure that
your safety is not jeopardized. A moment’s lack of attention
can result in an accident, as can failure to observe certain
simple safety precautions.
1. Read, study and understand the Owner’s Manual and all
the warning labels on this product. Furthermore, it is
recommended to familiarize yourself and others with the
proper operation and workout recommendations for this
Tuff Stuff product prior to use. Some of this information
can be obtained in this Owner’s Manual, as-well-as from
your local Tuff Stuff retailer.
2. It is imperative that you retain this Owner’s Manual and be
sure all warning labels are legible and intact.
Replacement Owner’s Manuals and labels are available
from your local Tuff Stuff retailer.
3. Consult with your physician before beginning any exercise
program.
Safety Precautions
CFM-550 Compact Frontal Machine
2
4. Use proper discretion when children are present.
5. Frayed or worn cables can be dangerous and may cause
injury. Periodically check these cables for any indication
of wear.
6. Keep hands, limbs, loose clothing and long hair well out of
the way of moving parts.
7. Do not attempt to lift more weight than you can control
safely.
8. Inspect the Compact Frontal Machine for any sign of wear
on parts, hardware becoming loose or cracks on welds. If
a problem is found
do not use or allow the machine to
be used
until the defective part is repaired or replaced.
9.
Pay special attention to the
Push Pull Pins 1/2 X 3-1/2
(#38)
located on the
Press Bar Selector Housing (#7)
,
and the
Front Upright (#5)
, also the
Turn/Pull Pin w/
Knob (#39)
located on the
Leg Extension Bench Frame
(#4)
. See
Fig.1
. Be sure they are fully engaged into the
selected holes. Refer to
Fig. 2, 3
for further illustration of
this instruction.
Fig. 1
Illustration above depicts the location of the
Push Pull Pins 1/2”
X 3-1/2 (#38)
and the
Turn/Pull Pin w/Knob (#39)
on this unit.
Turn/Pull Pin
w/Knob (#39)
Push Pull Pin
1/2 X 3-1/2 (#38)
Turn/Pull Pin w/Knob
Fully Engaged
Fig. 3
Caution:
Check the
Turn/Pull Pin w/Knob (#39)
to be fully
engaged into the selected hole of the
Bench Press Adj. Seat Tube (#9).
Fig. 2
Caution:
Check that the two
Push Pull Pins 1/2 X 3-1/2 (#38)
located on the
Press Bar Selector Housing (#7)
, and the
Front Upright
(#5)
are fully engaged into the selected holes of the
Press Bar (#6)
, and
the
Back Pad Bracket (#12).
Push Pull Pin
1/2 X 3-1/2
Fully Engaged
Push Pull Pin
1/2 X 3-1/2 (#38)
Содержание CFM-550
Страница 20: ...FIG 64 FIG 65 FIG 66 FIG 67 FIG 68 FIG 69 CFM 550 Compact Frontal Machine 19...
Страница 21: ...CFM 550 Compact Frontal Machine 20 CFM 550 CABLE MAPPING DIAGRAM FIG C FIG A FIG B FIG D...
Страница 22: ...CFM 550 EXPLODED VIEW DIAGRAM CFM 550 Compact Frontal Machine 21...
Страница 27: ...CFM 550 Compact Frontal Machine 26 N o t e s...
