manualshive.com logo in svg

TuffStuff CFM-550, Руководство пользователя

Поделиться
Скачать
TuffStuff CFM-550 Скачать руководство пользователя страница 12

FIG. 38      

Next, install one Nylon Pulley 4-1/2 Rd (#45-Labeled D)  onto 

the pulley  plate located on the 

Front Upright (#5)

,  in the position  as 

shown above, and secure it into place using one Hex Head Cap Screw 
3/8-16 X 1-3/4 (#73), two Flat Washers SAE 3/8” (#60), one 

Cable 

Retainer Bracket (#20),

 and one Nylon Insert Jam Lock Nut 3/8-16 (#68).

 

 

Note: 

Be sure to position the 

Cable Retainer Bracket (#20)

 as 

shown above. 
 

Next, insert one Nylon Pulley 4-1/2  Rd. (#45-Labeled F) into the  slot lo-
cated on the

 Front Upright (#5)

 and secure  it into place using one Hex 

Head Cap Screw 3/8-16 X 2-1/2 (#74), two Flat Washers SAE 3/8” (#60), 
and one Nylon Insert Jam Lock Nut 3/8-16 (#68). 

FIG. 37     

Install two Nylon Pulleys 4-1/2 Rd. (#45-Labeled C, E) into the 

pulley bracket located on the 

Press Bar Selector Housing (#7) 

and 

secure them into place using one Hex Head Cap  Screw  3/8-16 X 2-3/4 
(#75), two Flat Washers SAE 3/8” (#60), and one Nylon Insert Jam Lock 
Nut 3/8-16 (#68).

 

Fig. 39

       Assemble the 

Adjustable Double Pulley Bracket (#16)

 using 

two Nylon Pulleys 4-1/2 Rd. (#45-Labeled G, K), two Hex Head Cap 
Screws 3/8-16 X 1-3/4 (#73), four Flat Washers SAE 3/8” (#60), and two 
Nylon Insert Jam Lock Nuts 3/8-16 (#68). 
 

Note:

 

The four holes on the 

Adjustable Double Pulley Bracket 

(#16)

 are used to adjust the cable tension once the cable routing 

has been completed. 

FIG. 36      

Next, route the end of the 

Lat Cable (#27) 

through the opening 

located at the  bottom of the 

Top Pulley Housing (#3)

.    Then insert a 

Nylon Pulley 4-1/2 Rd. (#45-Labeled B) into this slot

 

and secure the Nylon 

Pulley 4-1/2 Rd. (#45-Labeled B)  into place using one Hex Head Cap 
Screw 3/8-16 X  2-1/2 (#74), two Flat Washers SAE 3/8” (#60), and one 
Nylon Insert Jam Lock Nut 3/8-16 (#68).  Be sure the cable is routed prop-
erly into the groove on the Nylon Pulley 4-1/2 Rd. (#45-Labeled B). 
 

Note: 

Use Cable Mapping Diagram on page  20 for further detailed 

illustration of the

 

Lat Cable (#27)

 

routing.

 

CFM-550 Compact Frontal Machine 

11 

Содержание CFM-550





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды